Seven Field Tests to Run Before Choosing a Combine Harvester for Paddy
Most farmers and custom-hiring operators choose a combine harvester from brochures, dealer conversations and what their neighbours use. But a harvester that performs well in one region’s dry wheat fields can struggle in another region’s wet paddy. The most reliable way to choose is to see the machine work in conditions like your own. If a dealer offers a field demonstration, these seven tests show far more than any spec sheet.
Test 1: The soft-field entry test
Ask for the demo in a field that is still slightly soft, not a dry showcase plot. Watch how the machine enters, turns at the headland and moves through the wettest part of the field. Does it hold a steady speed, or does it slip and surge? Does it leave deep ruts? In paddy, the days your machine can’t enter the field are the days you lose bookings, so this matters more than any other test.
Test 2: The grain loss frame test
Bring a 1 m² frame made from four sticks. After the machine has made a full pass, place the frame behind it in 3 places and count the loose grains on the ground. Compare that with a frame in uncut crop. A well-set combine harvester should leave very little extra grain behind. If losses are high, ask the operator to adjust the settings and repeat the count. This shows both the machine’s ability and how easy it is to tune.
Test 3: The broken grain sample
Take a handful of grain from the tank and spread it on your palm. Look for cracked or broken grains and for unthreshed grain still attached to bits of panicle. Too many broken grains will cost you at the mill, especially with long-grain varieties. Ask how quickly drum speed and concave clearance can be changed in the field.
Test 4: The heavy crop feed test
Watch the machine go through the densest part of the crop. Listen to the engine. A machine that struggles, drops RPM or chokes in dense crop will lose hours every day in a good season. A steady sound and smooth feed tell you the threshing system matches the cutting width.
Test 5: The unloading and turning test
Time how long the machine takes to unload a full grain tank into a trolley, and how long each headland turn takes. These small delays add up across a season. A quick, clean unload and tight but gentle turns mean more acres per day.
Test 6: The daily maintenance walk-around
Ask the operator to show you the daily service routine: greasing points, radiator screen cleaning, belt checks and, on tracked machines, track tension and roller checks. If the daily routine takes too long or the access points are hard to reach, it will be skipped in peak season, and that’s when breakdowns happen.
Test 7: The service and parts question
The best machine is only as good as the support behind it. Ask:
- Where is the nearest service point?
- Which wear parts are usually stocked?
- How quickly can a mechanic reach a field during harvest season?
A harvester that waits three days for a belt in the middle of the season loses more money than any difference in purchase price.
Putting it together
After the demo, score each test on a simple 1–5 scale and compare machines on the same scorecard. The best combine harvester for you isn’t the one with the biggest numbers in a brochure. It’s the one that keeps working in your fields, keeps losses low and gets back to work quickly when something goes wrong.
For paddy regions where fields often stay soft at harvest, a tracked combine harvester usually does well on the first test, which is often the deciding one. A harvester designed for wet paddy keeps earning on the days other machines are waiting for fields to dry. For a wider comparison of features to consider, see this guide on choosing the best combine harvester.
Comments
Post a Comment